From HBM's Nuclear Tech Wiki
Back to Redstone-over-Radio
Below is a list of every value and command compatible with the RoR reader and the RoR controller. All values and commands are case-insensitive, meaning that lowercase and uppercase letters are treated identically.
Values
RBMK Fuel Rod
| Value
|
Return
|
columnheat
|
Column heat in °C.
|
rodheat
|
Skin temperature in °C.
|
depletion
|
Hull heat in °C.
|
xenon
|
Amount of xenon poisoning in the rod in percentage.
|
fastflux
|
Fast flux flowing through the rod.
|
slowflux
|
Slow flux flowing through the rod.
|
flux
|
Total flux flowing through the rod.
|
RBMK Control Rod
| Value
|
Return
|
extraction
|
Control rod level in percentage.
|
RBMK Steam Channel
| Value
|
Return
|
fill
|
Amount of water in mB.
|
steam
|
Amount of steam in mB.
|
consumption
|
Amount of water being boiled in mB/t.
|
RBMK Fluid Heater
| Value
|
Return
|
in
|
Amount of cold coolant in mB.
|
out
|
Amount of hot coolant in mB.
|
Fusion Reactor Vessel
| Value
|
Return
|
plasma
|
Plasma energy in KyU.
|
consumption
|
Fuel consumption in mB.
|
progress
|
Progress in percentage (number from 0 to 100).
|
recipe
|
The recipe's unlocalized name. All recipes are preceded by fus. (example: the deuterium-tritium recipe would return fus.dt).
|
active
|
1 if active, 0 if inactive.
|
temp
|
Perffluoromethyl temperature in kelvin.
|
Chicago Pile Fuel Loader
| Value
|
Return
|
meta
|
Returns the "meta" value of the last rod in the channel. Meta values for all rods are defined in the Chicago pile page. If there is no last rod, it will return -1.
| Rod
|
Meta
|
| Chicago Pile Ra226Be Neutron Source
|
0
|
| Chicago Pile Po210Be Neutron Source
|
1
|
| Chicago Pile Zirconium Rod
|
2
|
| Chicago Pile Natural Uranium Rod
|
3
|
| Chicago Pile Plutonium-239 Rod
|
4
|
| Chicago Pile RGP Rod
|
5
|
| Chicago Pile Nuclear Waste Rod
|
6
|
|
depletion
|
Depletion of the rods.
|
hullheat
|
Depletion of the rods in percentage (value from 0 to 100).
|
lifetime
|
Lifetime of the last rod in the channel. This value is constant and depends on the type of rod used.
|
temp
|
Temperature in °C.
|
Miscellaneous Reactors
| Value
|
Return
|
heat
|
Temperature in °C.
|
pressure
|
Pressure in bar.
|
water
|
Amount of water in mB.
|
steam
|
Amount of super dense steam in mB.
|
co2
|
Amount of carbon dioxide in mB.
|
state
|
1 if active, 0 if inactive.
|
| Value
|
Return
|
rods
|
Control rod level but inverted.
|
coreheat
|
Core heat in °C.
|
hullheat
|
Hull heat in °C.
|
flux
|
Amount of flux in the reactor.
|
depletion
|
Rod depletion in percentage.
|
| Value
|
Return
|
heat
|
Temperature in TU.
|
flux
|
Amount of flux in the reactor.
|
mud
|
Amount of poisonous mud in mB.
|
coolant_hot
|
Amount of hot (output) fluid in mB.
|
coolant_cold
|
Amount of cold (input) fluid in mB.
|
DFC Stabilizer
| Value
|
Return
|
durability
|
Durability.
|
durabilitypercent
|
Durability in percentage.
|
Fluid
| Value
|
Return
|
type
|
The fluid's unlocalized name in upercase.
|
fill
|
Amount of fluid in mB.
|
fillpercent
|
Amount of fluid in percentage.
|
Flow Gauge Pipe
| Value
|
Return
|
deltatick
|
Amount of fluid being transferred in mB/t.
|
deltasecond
|
Amount of fluid being transferred in mB/s.
|
Fluid Valve with Counter
| Value
|
Return
|
value
|
Value of the counter.
|
state
|
1 if active, 0 if inactive.
|
| Value
|
Return
|
input
|
Amount of input fluid in mB.
|
output
|
Amount of output fluid in mB.
|
Energy
| Value
|
Return
|
fill
|
Amount of energy in HE.
|
fillpercent
|
Amount of energy in percentage.
|
delta
|
Amount of energy being transferred in HE/t
|
Power Gauge
| Value
|
Return
|
deltatick
|
Amount of power being transferred in HE/t.
|
deltasecond
|
Amount of power being transferred in HE/s.
|
Generation
| Value
|
Return
|
output
|
Output power in HE/t.
|
flywheel
|
"Spin" of the turbine (essentially its efficiency).
|
| Value
|
Return
|
output
|
Output power in HE/t.
|
| Value
|
Return
|
turbinepercent
|
Fuel consumption slider position in percentage.
|
turbinespeed
|
Turbine speed in RPM.
|
output
|
Power output in HE/t.
|
| Value
|
Return
|
state
|
1 if active, 0 if inactive.
|
throttle
|
Flow rate (number from 0-30, ranging from 0.0 mB/t to 6.0 mB/t).
|
power
|
Amount of power buffered in the engine in HE.
|
fuel
|
Amount of fuel in mB.
|
efficiency
|
Piston efficiency given the specified fuel's fuel grade.
|
Heater
| Value
|
Return
|
hotfluid
|
Amount of hot (input) fluid in mB.
|
coldfluid
|
Amount of cold (output) fluid in mB.
|
heat
|
Heat in TU.
|
| Value
|
Return
|
heat
|
Heat in TU.
|
fuel
|
Amount of fuel in mB.
|
burnRate
|
Heat in TU.
|
state
|
1 if active, 0 if inactive.
|
Miscellaneous
| Value
|
Return
|
progress
|
Progress in percentage (number from 0 to 100).
|
recipe
|
The recipe's unlocalized name. All recipe names are preceded with ass. (example: the microchip recipe would return ass.chip).
|
active
|
1 if active, 0 if inactive.
|
| Value
|
Return
|
progress1
|
Progress in percentage (number from 0 to 100).
|
progress2
|
progress3
|
progress4
|
recipe1
|
The recipe's unlocalized name. All recipe names are preceded with ass. (example: the microchip recipe would return ass.chip).
|
recipe2
|
recipe3
|
recipe4
|
anyactive
|
1 if any of the 4 machines are active, 0 if any are inactive.
|
active1
|
1 if active, 0 if inactive.
|
active2
|
active3
|
active4
|
| Value
|
Return
|
progress
|
Progress in percentage (number from 0 to 100).
|
recipe
|
The recipe's unlocalized name. All recipe names are preceded with chem. (example: the hydrogen recipe would return chem.hydrogen).
|
active
|
1 if active, 0 if inactive.
|
| Value
|
Return
|
progress1
|
Progress in percentage (number from 0 to 100).
|
progress2
|
progress3
|
progress4
|
recipe1
|
The recipe's unlocalized name. All recipe names are preceded with chem. (example: the hydrogen recipe would return chem.hydrogen).
|
recipe2
|
recipe3
|
recipe4
|
anyactive
|
1 if any of the 4 machines are active, 0 if all are inactive.
|
active1
|
1 if active, 0 if inactive.
|
active2
|
active3
|
active4
|
| Value
|
Return
|
progress
|
Progress in percentage (number from 0 to 100).
|
recipe
|
The recipe's unlocalized name. All recipe names are preceded with ass. (example: the microchip recipe would return ass.chip).
|
active
|
1 if active, 0 if inactive.
|
booster
|
The remaining duration of the booster material in ticks.
|
plasma
|
This value is currently broken and will only return 0.
Input plasma energy in TU.
|
| Value
|
Return
|
progress
|
Progress in percentage (number from 0 to 100).
|
recipe
|
The recipe's unlocalized name. All recipe names are preceded with purex. (example: the flashgold billet recipe would return ass.flashgold).
|
active
|
1 if active, 0 if inactive.
|
| Value
|
Return
|
rad
|
Radiation level in RAD/s.
|
| Value
|
Return
|
type
|
The item's unlocalized name in upercase.
|
fill
|
Amount of items.
|
fillpercent
|
Amount of items in percentage.
|
Commands
Controller
This is a function that doesn't apply to a specific machine, but rather to the controller itself.
| Command
|
Action
|
selfdestruct
|
Causes the controller to explode, destroying itself in the process.
|
Terminal
| Value
|
Action
|
clear
|
Clears the terminal.
|
write!text
|
Sends a message to the terminal. The message itself is anything that is written after the exclamation point (example: write!Hello World will write "Hello World" in the terminal); any additional exclamation points will be ignored and anything written after one will make the message not be sent.
|
set<line#>!text
|
Accepts an integer from 1 to 16. Writes a given message on a set line, with line 1 being at the bottom and line 16 being at the top (example: set7!Hello World will write "Hello World" on line 7 from the bottom).
|
submit!command
|
Sends a command to the terminal. The command is anything written after the exclamation point (example: submit!chan example will execute the chan example command in the terminal, setting the channel to 'example').
|
Miscellaneous
| Value
|
Action
|
setrecipe!name
|
Sets the recipe, with the name parameter being the unlocalized name of the recipe. Recipes that are set via redstone-over-radio are 4 times slower than normal while consuming the same amount of energy.
|
| Value
|
Action
|
setrecipe!name
|
Sets the recipe, with the name parameter being the unlocalized name of the recipe. Recipes that are set via redstone-over-radio are 4 times slower than normal while consuming the same amount of energy.
|
